| Finned Type | COB Type | ||||
|---|---|---|---|---|---|
| MR16 | MR16X | MR16F | MR16 | GU10 | |
| 3W | ICLAMR16P3WQ | ICLAMR16P3WQX | ICLAMR16P3WQF | ||
| 5W | ICLAMR16P5WQ | ICLAMR16P5WQX | ICMR16P5WCOB | ICGU10P5WCOB | |
| 8W | ICMR16P8WCOB | ICGU10P8WCOB | |||
- Language [en]
-
Welcome
[ICAM INDUSTRIAL LIMITED]
mm Led- The Biggest Led Available In The Market TodayThere are different types of LED devices available in the market today and they come in different sizes. The smallest LED is 3mm in diameter while the largest LED is 10mm in diameter. There are many advantages of opting for a 10mm LED device. a.Size matters. A 10mm diameter LED is better than three 3mm LEDs. Needless to the say, the size of the LED matters a lot. b.Lumens per watt differ on the basis of the size of the device. As compared to smaller LEDs, 10 mm LED are a lot brighter and offer strong intensity light. c.Cost of a 10mm LED works out cheaper in the long run. This LED will give you more power for a longer period of time without any repairs or maintenance. Further, making sure that the LED is not affected by voltage fluctuations will increase the life of the LED. For a very long time, LEDs were considered unsuitable for large scale use because the intensity of light emitted was too small for commercial exploitation. However, due to the fact that LEDs consume lesser power and further due to the fact that only 10% of the energy consumed by a LED is wasted, it always was a better choice than incandescent or florescent bulbs. By increasing the diameter of the LED and by arranging numerous LEDs in a cluster or a pattern, the light emitted by the LED was strong enough to be considered as a viable alternative for conventional lighting systems. 10mm LEDs are available in different colors. This makes it perfect for signs and advertisements. It is very important that you LED business sign be visible from a long distance. A LED sign made solely out of 10 mm units shall be clearly visible from a distance of 300 yards. This is definitely the right way to advertise your business. These LEDs shall last for 50,000 to 60,000 hours of active use. Even if you use these LEDs twenty four hours in a day, these devices shall last for more than five years. All you have to do is to ensure constant current is supplied to the LEDs. This is best done by opting for a AC DC converter which will convert the AC supply into DC current not going beyond the maximum current rating of the device. More than one eighth of the entire power generated in the world is consumed by lights, bulbs and other devices intended for illumination purposes. The consumption is so high because nine-tenth of the energy supplied to any conventional bulb is expended in merely heating the filament. The remaining ten percent is what is used to power the device. This wasteful form of lighting is best replaced by ten mm LED lights which consume 90% of the energy supplied and only 10% of the energy is wasted. LED are governed by a law known as the Haitz's Law. This law states that the LED brightness will double every 18 to 24 months. The super bright 10mm LED is at the top of the chain as one date. It is possible to build a bigger LED but it is not practical to do so. Considering the heat generated and the size of the heat sink required, it makes sense to go in for multiple 10 mm LEDs arranged in a series or rows to ensure brighter illumination. ...
Contact us
- Tel:
(86)755-27592771 - Email:sales@icamtech.com
-
MSN:
Talking To Me
sale@icamtech.com
-
Skype:
icamtech.com
Shop & buy
About us
More links